New Arrival Slim rfid access control dual full height turnstile 1.8m high Professional entrance access control
Working Performance
1. Stable performance, safe and reliable, widely used in the places where passenger flow is great and monitoring is needed such as office stations, lobby, office buildings, airport, etc.
2. Heavy-duty, high Size prevents user from climbing over the gate to gain unauthorized access.
3. Can print customers' LOGO on our product like sliding panels or steel body.
4. customization possibilities in fitting with interior design
5. It is always integrated with any kind of access controller system (covering: face recognition terminal, QR code scanner, RFID device, Push button, Fingerprint and Bio-metric device).
Specification
| 1 | Cabinet dimension | 1400 (L) x 310 (W) x 1000 (H) mm |
| 2 | Cabinet material | 304 stainless steel (316 ss can be custom-made) |
| 3 | Switching power supply | AC220±10%V 50Hz or AC110±10%V 60Hz |
| 4 | opening/closing time | 0.2s |
| 5 | Arm material | thickness 10mm Acrylic, or tempered glass or steel (custom) |
| 6 | Access mode | single in/out or Bidirectional |
| 7 | Passthrough Width | 600mm (or custom) |
| 8 | Mechanism | DC Brushed motor+Clutch (or Servo motor) |
| 9 | Communication interface | RS485, TCP/IP |
| 10 | Infrared sensor | 6~10 pairs |
| 11 | Optimal flow rate | 40 persons/min (open), 35 persons/min (closed) |
| 12 | Reset time after break down | default 10s can be changed to fit different demands |
| 13 | MCBF | 5,000,000 Cycles |
| 14 | Working humidity | 30%~95% |
Function and characteristics
1. When the power off, arm open automatically and power on again, the arm will be held automatically.
2. Safety function(anti-pinching). By default sliding wing will auto- reverse if IR sensor detected obstacle within the sliding
wing area. This avoid sliding wing to accidentally hit onto to user. Can adding green/red/blue light lining effect along the edge of the sliding wing to ensure sliding wing is easily visible.
3. Problem-self-checking function.
4. If a passenger pass without card read or valid card read, the machine will alarm until the passenger gets back from the gate and then take a valid card to be read for passing.
5. When a valid card read and a passenger passed, the arm can be delayed to close from 1-60s which can be set in the control panel.
Product Design
Field Installation
lobby entry,
Subway,
Airports,
Stations,
Library, Bookstores,
Parks, Exhibition halls
Hotel,
Factory,
Bank,
Hospital,
OEM / Custom Service
1. customization for the shape of Retractable sliding panels: arc-shaped, standard is square.
2. the height of sliding panels: half high, 1000, 1200, 1400, 1800mm.
3. material of sliding panels.
4. LED visible lighting: blue, green, red, optional.
5. Passing width of each lane: if need a 900mm width, will further need to widen the size of turnstile body.
Our Service & Strength
1. We Focus on Turnstile for more than 13 years.
2. We do customize Service. OEM, OEM is available.
3. We Optimize For Lower Cost, remove unnecessary features/use mould design, save your money!
4. We Timely Response every customer! Response to customers whoever did business with us in 3mins, and assist with project solutions later.
Product Tags:
|
|
Slim Rfid Dual Full Height Turnstile Gate Access Control Barrier System Images
|
